MOB Hydraulic Cylinder Lightweight Double Oil Seal Cylinder Bore Full Single-Acting Double-Acting Cylinder Small Lifting Tie-Rod Hydraulic Cylinder

Hydraulic Cylinder Leakage Fault Judgment and Handling Methods, and Usage Precautions:

1. Hydraulic System Issues

If oil leakage is detected during the use of a hydraulic cylinder, the first step is to check whether the hydraulic system is operating normally. The issue may be caused by aging or wear of high-pressure oil pipes, loose pipe connections, etc. In such cases, the hydraulic system requires maintenance or replacement of components.

2. Cylinder Seal Problems

The cylinder consists of two sealing structures at the front and rear ends. If oil leakage occurs when the front end extends, it may be due to aging, damage, or blockage of the front seal. In this situation, the cylinder needs to be disassembled for inspection, and severely worn seals should be replaced.

3. Lubrication Issues

During the extension and retraction of the cylinder, proper lubrication protection is essential. Poor lubrication can lead to wear and aging of the seals, resulting in oil leakage. Therefore, during cylinder maintenance, it is important to enhance lubrication protection.

In summary, if oil leakage is observed when the front end of the cylinder extends, it is necessary to first inspect the hydraulic system, cylinder seals, and lubrication conditions. Corresponding solutions can be implemented based on the specific issues. It is recommended to conduct regular inspections and maintenance of the cylinder to ensure normal operation and extend its service life.